Baby Warmers

Range Of Baby Warmers From VNG Medical

What Are Baby Warmers?

Baby Warmers are devices that provide heat to the infant’s body. Thus, these devices help in maintaining the infant’s body temperature. In addition, they also keep the metabolism rate in check. These devices are especially useful in newborns showing rapid heat loss. Baby warmers are highly important for babies born in a very cold climate.

Need For Baby Warmers

Babies can’t regulate their body temperature as effectively as kids and adults. Their bodies have more surface area by weight, causing quicker heat loss. Thus, this is more prominent in premature and low birth-weight babies. Because bodywarmers provide artificial support to keep the body temperature constant. Babies are often kept on baby warmers for a couple of hours immediately after birth. This is to ensure stability.

Premature And Low Body Mass Babies

For the best early childhood development, keep babies at optimal temperatures. This temperature should be neither too hot nor too cold. Thermoregulation is a crucial point for premature, sick, and low-birthweight babies.

Premature and low-birthweight babies don’t have much body fat. So, they cannot carry out efficient heating and cooling. Their bodies may not be ready to control their own temperature, even in a warm environment.

Effect Of Cold Temperatures On Babies

When babies are too cold, they can become less responsive. They are dull and may not exert the energy it takes to cry, and are not interested in feeding. The respiration of the neonate is also affected. This is because all their energy is being consumed by trying to stay warm.

Keeping babies at optimal temperatures can conserve energy. This also builds up energy reserves and leads to healthy development.

Range Of Baby Warmers From VNG Medical

VNG Medical presents a range of heating systems that ensure the health and comfort of the baby.

Mentioned below is the fine range of baby warmers manufactured by VNG Medical.

VNG-RW-800

Titled as the perfect neonatal warmer, VNG-RW-800 is an open care warmer. It has air mode and other specifications. Thus making it the perfect heating device.

Front Panel Description

The panel on  VNG-RW-800  is user-friendly. Because it helps in easy monitoring and maintenance of the infant’s body temperature.

The panel describes the functioning Mode of the device and the baby’s temperature. It also has switched to manipulate the same.

Modes Of Operation

The device functions in 2 modes. Namely- Manual Mode and Servo Mode.

  • Manual Mode

In this mode, the warmer power is set by the user. The patient must be closely monitored when this mode is in function.

  • Servo Mode

In Servo mode, the system works automatically. It also maintains the temperature of the patient at the temperature set by the user.

Efficiency Of Servo Mode

We advise using the device on Servo Mode rather than the Manual Mode. This is because, in servo mode, the unit operates to safely deliver the required heat to the infant. The infant temperature serves as a reference for control. Hence there is no over-heating/under-heating. In conclusion, efficient thermoregulation in new-born.

Electrical Specifications

  • Heater Power – 650 Watt
  • Examination Light – 9 watts
  • Power Cable Length – 3 meters
  • Fuse Used – 4 Amperes
  • Also, its Power Source – 220-volt  Ac/50 Hz

Mechanical Specifications

  • Paint And Coating – MS Fabrication With Power Coating.
  • Castor – Each Unit Has Four Castors (Two Lockable)

Set Temperature Range

  • Skin: 32 Degrees To 38 Degrees
  • Resolution: 0.1 Degree
  • Also, accuracy: 0.2 Degree

VNG-RW-900

Moreover this system provides excellent warming therapy to infants suffering from extreme heat loss. It consists of:

baby warmers
  • A Cart
  • Bassinet Assembly
  • A Heater and
  • Pillar Module

Making it suitable equipment for NICU wards, labor rooms, and nurseries. Therefore, it is an excellent monitoring device for babies with health conditions.

Electrical Specifications

  • Heater Power – 650 Watt
  • Examination Light – 9 watts
  • Power Cable Length – 3 meters
  • Fuse Used – 4 Amperes
  • Also, a Power Source – 220-volt Ac/50 Hz

Set Temperature Range

  • Skin: 32 Degrees To 38 Degrees
  • Resolution Accuracy: 0.2 Degree

VNG-RW-1000

VNG-RW-1000 has thick Acrylic collapsible side panels. It also allow for easy access to the infant from all sides. It comprises 2 modes- Servo and Manual. Moreover, both of these modes permit the regulation of the radiant energy emitted by the system.

baby warmers

Front Panel Description

The front panel of VNG-RW-1000 is like that of VNG-RW-800. It has the following specifications:

  • Heat Power Indicator
  • Button For Selection Of Servo Or Manual Mode
  • LED Display For Viewing The Set Temperature
  • LED Display For Viewing The Baby’s Temperature
  • Switches To Increase Or Decrease The Set Temperature
  • Alarm Mute Switch
  • Indicators For The Modes Of Functioning, Probe Failure And High or Low Temperature
  • APGAR Switch
  • Also, APGAR Timer Display

Electrical Specifications

  • Heater Power – 650 Watt
  • Examination Light – 9 watts
  • Power cable Length – 3 meters
  • Fuse Used – 4 Amperes
  • Also, the power Source – 220-volt  Ac/50 Hz

Mechanical Specifications

  • Paint And Coating – MS Fabrication With Power Coating.
  • Also, castor – Each Unit Has Four Castors (Two Lockable)

Set Temperature Range

  1. Skin: 32 Degrees To 38 Degrees
  2. Resolution: 0.1 Degree
  3. Also, the accuracy: 0.2 Degree

Other Specifications

VNG-RW-1000 is accessorized with various components. Such as:

  • Bassinet
  • Swivelling Heater Source Box To Take X-Ray
  • A Monitor Tray
  • IV Stand To Mount Infusion Pump
  • Baby Tray With Three Side Collapsible Clear Acrylic Wall
  • Drawer With 5kg Capacity
  • Anti-Skid Casters With Locking Facilities
  • Also, Observation Light

Alarm Function

Each time the unit turns on, an automatic test sequence initiates. So, this is to verify that the visual display and the audible alarms are functional. The device is set to raise alarms when any kind of malfunction occurs. An alarm may activate if the temperature probe fails or there are erratic changes in the infant’s temperature. The conditions may be as the following:

Setpoint (High)

 A  high setpoint alarm will occur if the set temperature sensed by the skin probe is 0.5 degrees above the setpoint. This alarm will occur after a delay of 10 seconds.  The alarm will be audible as well as visual. Thus, audible alarm will silence by pressing the alarm mute switch on the front panel. However, the visual indicator will continue. If the condition is not corrected within 20 seconds, the audible alarm will resume.

Setpoint (Low)

A  low setpoint alarm will occur if the set temperature sensed by the skin probe is 0.5 degrees less than the setpoint. This alarm will occur after a delay of 10 seconds.

Probe failure

During the Servo Control Mode, an alarm will raise if the temperature probe:

  • Fails
  • Is Open
  • Short
  • Lastly, Un-Plugged

The temperature of the baby will display on the front panel of the device and also the heater will turn off. This alarm cannot be silenced until the correction of the alarm condition.

Infant Incubator

Infant incubator mainly focuses on stabilizing the infant’s body temperature. However, it does so through the means of ambient temperature monitoring and regulation. It also provides moisture control for comfortable breathing.

Baby Infant Incubator provides the atmosphere just like Mother's Womb for Newborn Premature Babies.

A Nurturing Environment For The Neonate

Incubators are important for the safe development of the baby. Infant Incubator from VNG Medical provides a safe, controlled space for infants. This is very important while their vital organs develop.

One can adjust the environment to provide the ideal temperature. In addition to this one can adjust, the perfect amount of oxygen, humidity, and light as well.

Quality Assurance From VNG Medical

We at VNG Medical are committed to bringing our customers high-end medical technology. Thus, our Baby Warmers are a range of capable products that have excellent output in terms of medical assistance.

All the provided equipment is check for utmost quality and functionality.

Leave a Comment

Your email address will not be published.